Disclosure: This is a post sponsored by Krylon. All opinions are honest and my own.
It’s high summer here at CraftTestDummies World Headquarters and that means more time in the remote office- AKA my porch! Located right off of our bedroom, it’s a lovely covered veranda that is a great place to read, blog, and hang out with the kids. But after 5 years out there, our current patio chairs were looking a little…well….sad.
However, you can see that once I removed the cushions, the frame was still sturdy, even if it was a bit faded from the sun.
Here’s where Krylon Rust Protector came in to save the day!
First, here’s what they say about the product on the Krylon Rust Protector website:
With dry time as little as eight minutes, dirt, dust, grass and debris don’t have a chance to ruin your project. That’s because the only thing that Krylon Rust Protector leaves behind is a flawless finish and unbeatable corrosion protection.
Fastest dry. Strongest finish.
- Dries to a smooth, durable, rust-fighting finish in as little as eight minutes (up to 15 times faster than the leading aerosol rust competitor)
- Adheres direct to metal surface for effective corrosion protection without the use of primer
- Advanced formula for superior adhesion and performance
- Available in both spray and brush-on formulas
- Offered in a wide range of popular colors and finishes
- Available in a complete line of primers for added protection
- Can also be used on non-metal substrates
Its time for a new way to conquer rust.
I was given 3 cans of Semi-Satin Black to use for this project, so I went to town.
First, I shook the can vigorously per the instructions, Then I angled the adjustable nozzle into a horizontal position so I could get into the nooks and crannies.
Note, I did NOT prime the chairs first. Heck, I barely scraped off the cobwebs!
I love the angled nozzle- it gives me so much more precision in directing the spray. I am more accurate and there is less waste via overspray!
All done! And since I was spray painting outside on a humid day, it took about 10 minutes for the paint to dry. I was amazed at how fast it cured….and how great it looks! I think already it looks like a million bucks!
Then I added my new cushions from a discount online store.
TA-DA! A new look for a fraction of what new chairs would cost. Each chair took one can of paint (about $5 bucks USD each) and the cushions were about $40. So for under $100 dollars I got basically a “new” patio set. A set of 2 new aluminum patio chairs with cushions cost a minimum of $300 new, so it was a great investment, don’t you think?
I can’t wait to set it up on our new deck…which currently looks like this:
I’ll post more pictures of our deck project later!
A big “thank you” to Krylon for sponsoring this post- and I’m looking forward to giving more of our outdoor furniture and accessories a facelift with Krylon Rust Protector!
- Spooky Spider Halloween Bookmark Craft - October 24, 2018
- Review and Demo of LDRS Hybrid Ink Pads - October 15, 2018
- Review and Demo of Nuvo Hybrid Inks - October 1, 2018
- Craft Studio Tour and Organization Ideas - September 20, 2018
- Wax Paper Resist Background Technique - March 20, 2018
- Comparison of Liquid Watercolor Markers/Pens - March 16, 2018
- SAI Japanese Traditional Watercolor Brush Markers- Review & Demo - February 23, 2018
- Rinea Metallic Foil Paper & Ghost Ink Review - February 21, 2018
- Jane Davenport debuts at Creativation 2018 & Watercolor Card - February 13, 2018
- Creativation 2018: New Product Showcase - January 20, 2018
Jessica Hill says
I used this on my patio set last year. It is GREAT stuff!
Dale Rose Stream says
Another great project… as always! It’s great to see you in the midst of a reno as well LOL!!!!!!! I can’t wait to see your progress and final photos as well…… we are going to start my drywall tonight. Last night was a bust, as Michael wants to ‘hire’ a guy from work to help him carry the drywall downstairs so that I don’t have to…. good thinking. My poor little hands and body have been getting a work out, in fact, I’ve lost a few pounds doing this, as I expected. It’s like I’m back to work as a Fisheries tech again. I can’t wait to see your finished deck and patio set, and any other surprises you may have in store for us…hugs from NW Michigan! Turn on the a/c!!!!!!
Chris R says
This is a project I was considering and wondering if it worked as good as they said. I’m thankful for your review.
Lula Porter says
I’m taking this DIY a step further. I have been collecting colorful heavy outdoor fabric for over a year to resurrect my sad chairs. The chairs themselves needed more than a coat of paint to return to life. I started by removing the broken/rotted plastic wicker. Used fishing net (thanks to living near the coast, I can get all I want cheap) and nylon string to create a new back. Then the Krylon cure. Cut strips of a neutral fabric, used them to add padding to the arm rests by wrapping them over some loose padding (from sailboat cushions). Now I’m ready to recover the cushions. I would like to find some of that waterproofing stuff you use on tent seams for the finishing touch.
Barbie says
Love your “new” furniture! I’m doing my table and chairs on my porch and I don’t really have the option of purchasing new cushions. I have looked at lots and want, want!!!! LOL! On considering using a shower curtain. It’s very cute, and I figured it would be weather proof, but now I’m not sure. What do you think? I haven’t seen this done anywhere else…I reckon I’ll try it and if I hate it, I can try fabric. Thanks, for posting